Dolmar ES-151 User Manual download pdf (Page 15)

- The file holder makes file guidance easier. It is marked for

the correct 30° sharpening angle (keep the marks parallel

with the chain when filing, see illustration) and limits the cut

depth to the correct 4/5 of the file diameter. See "Accesso-

ries" for the order number.

30°

4/5

- After having sharpened the chain, the height of the depth

limiter must be checked by means of a chain gauge. See

"Accessories" for the order number.

- Correct even the smallest excess height with a special flat

file (F). See "Accessories" for the order number.

- Round off the front of the depth limiter (G).

Cleaning the guide bar

lubricating the sprocket nose

CAUTION:

Protective gloves must be worn.

Regularly inspect the bearing surfaces of the guide bar for

damage, and clean them with a suitable tool.

If the saw is used intensively it will be necessary to lubricate the

return sprocket bearings regularly (once a week). To do this,

first

thoroughly clean the 2 mm hole at the tip of the guide bar,

and then press in a small amount of multi-purpose grease.

Multi-purpose grease and grease guns are available as acces-

sories.

Multi-purpose grease (order no. 944 360 000)

Grease gun (order no. 944 350 000)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

No comments

Dolmar ES-151 User Manual Page 15