Dolmar Chainsaw PS6400CH User Manual download pdf (Page 36)

Instructions for periodic maintenance

To ensure long life, prevent damage and ensure the full functioning of the safety features the following maintenance must be per-

formed regularly. Guarantee claims can be recognized only if this work is performed regularly and properly. Failure to perform the

prescribed maintenance work can lead to accidents!

The user of the chain saw must not perform maintenance work which is not described in the operator’s manual. All such work must

be carried out by a DOLMAR service center.

Service, spare parts and guarantee

Maintenance and repair

The maintenance and repair of modern engines as well as all safety devices require qualied technical training and a special work-

shop equipped with special tools and testing devices.

We therefore recommend that you consult a DOLMAR service center for all work not described in this operator’s manual.

The DOLMAR service centers have all the necessary equipment and skilled and experienced personnel, who can work out cost-

effective solutions and advise you in all matters.

Please contact your nearest service center. Should you however not have an adress for a DOLMAR service center then please

contact the DOLMAR general trading company (see last page) who will gladly provide you with the adress of your nearest DOLMAR

service center.

Page

General Chain saw Clean exterior, check for damage. In case of damage,

have repaired by a qualied service center immediately

Saw chain Sharpen regulary, replace in good time 28-29

Chain brake Have inspected regularly at an authorized service center

Guide bar Turn over to ensure even wear of bearing surfaces

Replace in good time 22, 31

Starter cable Check for damage. Replace if damaged. 34

Before each start Saw chain Inspect for damage and sharpness 28-29

Check chain tension 22

Guide bar Check for damage

Chain lubrication Functional check 25

Chain brake Functional check 26

OFF switch,

Safety locking button,

Throttle lever Functional check 26

Fuel/oil tank

cap Check for tightness and lekages 24

Every day Air lter and lter hood Clean (more often if necessary) 32

Guide bar Check for damage, clean oil intake bore 31

Guide bar support Clean, in particular the oil guide groove 25, 30

Idle speed Check (chain must not run) 27

Every week Fan housing Clean to maintain good cooling air ow. 18, 35

Cylinder area Clean to maintain good cooling air ow. 35

Spark plug Check and replace if necessary 33

Mufer Check tightness of mounting

, clean spark arrester screen 33, 35

Chain guide Check 21

Screws an nuts Check their condition an that they are rmly secured

Every 3 months Fuel lter Replace 31

Fuel, oil tanks Clean

Annually Chain saw Check at an authorized service center

Catalytic mufer Check at an authorized service center

Storage Chain saw Clean exterior, check for damage. In case of damage,

have repaired by a qualied service center immediately

Guide bar/chain Demount, clean and oil slightly

Clean the guide groove of the guide bar 31

Fuel, oil tanks Empty and clean

Carburetor Run empty

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 75 76

Comments to this Manuals

No comments

Dolmar Chainsaw PS6400CH User Manual Page 36

Comments to this Manuals