Dolmar PB-250 Operator's Manual download pdf (Page 16)

aIr fIlTer

Level 1.

Parts required: REPOWER

Air and Filter Kit

NOTE

Clean daily.

1. Close choke (Cold Start Position [ ]). This prevents dirt from

entering the carburetor throat when the air lter is removed. Brush

accumulated dirt from air cleaner area.

2. Remove air lter cover. Brush dirt from inside cover.

3. Remove air lter and lightly brush debris from lter. Replace

lter if it is damaged, fuel soaked, very dirty, or the rubber sealing

edges are deformed.

4. If lter can be reused, be certain it:

• Fits tightly in the air lter cavity.

• Is installed with the original side out.

5. Install air lter cover.

fuel fIlTer

Level 1.

Parts required: REPOWER

Air and Filter Kit

DANGER

Fuel is VERY ammable. Use extreme care when mixing, storing

or handling.

1. Use a clean rag to remove loose dirt from around fuel cap and

empty fuel tank.

2. Use the “fuel line hook” to pull the fuel line and lter from the

tank.

3. Remove the lter from the line and install the new lter.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

No comments

Dolmar PB-250 Operator's Manual Page 16